Scope of Accreditation
Below are the methods we are accredited for, those that are covered by the flexible accreditation and the new ones that are not yet covered by this.
The tables contain information about the test method, method (reference), edition, sample type and measuring range.
Download: Scope of Accreditation – Chapter 7.1 [.pdf, Swedish]
Contact person
Johan Ageryd
Quality Manager
Phone: +46 (0)31-65 64 94
Asbestos, identification
This test method is not covered by the flexible accreditation.
Sample type
Solid materials
Method (reference)
SS ISO 22262-1
Measuring range
Chrysotile, Anthophyllite (Actinolite, Tremolite), Amosite, Crocidolite
Bend testing
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
SS-EN 910
SS-EN 8491
SS-EN ISO 5173
SS-EN ISO 7438
SS-EN ISO 15630-1, chapter 6 and 7
ASTM E190
ASTM E290
Breaking test
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
SS-EN 1320
SS-en ISO 9017
Tensile testing
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
SS-EN ISO 6892-1
ASTM E8 + E8M
ASTM E8
SS-EN ISO 15630-2, chapter 7
Measuring range
Force: 1 – 600 kN
Elongation: 0.025 – 2.0 mm
Ferrite content measurements/phase analysis
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
ASTM E562-19e1
ISO 9042
Measuring range
Volume share: 1 – 100 %
Strength test
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
SS-EN ISO 8492
SS-EN ISO 8493
SS-EN ISO 8495
SS-EN ISO 8496
Hardness testing
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference) Brinell
SS-EN ISO 6506-1
ASTM E10
Measuring range Brinell
HBW 1/10; HBW 1/30; HBW 2.5/187.5; HBW 5/750; HBW 10/3000
Method (reference) Rockwell
–
Measuring range Rockwell
HRC
Method (reference) Vickers
SS-EN ISO 6507-1
ASTM E384
Measuring range Vickers
HV 03; HV 1; HV 5; HV 10; HV 30
Analysis of chemical composition (OES)
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
ASTM E415
Measuring range
Col (C); Silica (Si); Manganese (Mn); Phosphorus (P); Sulfur (S); Chromium (Cr); Nickel (Ni); Molybdenum (Mo); Niobium (Nb); Copper (Cu); Titanium (Ti); Aluminum (Al); Vanadium (V)
Corrosion testing
This test method is covered by the flexible accreditation.
Sample type
Stainless steel
Method (reference)
SS-EN ISO 3651-2
ASTM A262, metod B
ASTM A262, metod E
ISO 9400, metod B
Measuring range
Intergranular corrosion
Sample type
Duplex
Method (reference)
ASTM 923; Method C
Measuring range
Intergranular corrosion
Sample type
Aluminum
Method (reference)
ASTM G67
Measuring range
Intergranular corrosion
Sample type
Stainless steel
Method (reference)
ASTM G48; Method A and C
Measuring range
Pit corrosion
Sample type
Stainless steel
Method (reference)
ASTM G48; Method B
Measuring range
Crevice corrosion
Sample type
Aluminum
Method (reference)
ASTM G66
Measuring range
Crevice corrosion
Macroscopic and microscopic examination
This test method is covered by the flexible accreditation.
Sample type
Welds in metallic materials
Method (reference)
SS-EN 1321
ISO 17639
SS-EN ISO 17639
Measuring range
Magnification: 1 – 1.000 times
Sample type
Metallic materials
Method (reference)
SCMM2
Measuring range
Magnification: 1 – 1.000 times
Sample type
Metallic materials
Method (reference)
SCSEM 1 (photographic documentation)
Measuring range
Magnification: 10 – 10.000 times
Sampling
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
SS-EN ISO 9016
SS-EN ISO 5178
SS-EN ISO 4136
Impact testing
This test method is covered by the flexible accreditation.
Sample type
Metallic materials
Method (reference)
SS-EN ISO 148-1
ASTM E23 (test rod type A only)
ASTM E23-02a
Measuring range
0-450 Joules
Contact persons
Lars Andersson
CEO
Phone: +46 (0)31-65 64 86
Johan Ageryd
Quality Manager
Phone: +46 (0)31-65 64 94
first.lastname@safecontrol.se
